WebTerm Frequently Asked Questions
How do I set NumLock within WebTerm?
WebTerm by default sets NumLock on when it initializes. To override this behavior, insert the "INITNUMLOCKSTATE=#" parameter in the .wts file. Setting the # value to correspond to the desired behavior:
- >0 = TURN NUMLOCK ON (default)
- 0 = TURN NUMLOCK OFF
- <0 = NO CHANGE
For example: INITNUMLOCKSTATE=0
WebTerm does not change the status of NumLock when a terminal window gets focus by default. You can override this behavior with the addition of the "FOCUSNUMLOCKSTATE=#" parameter to a .wts file. Setting the # value to correspond to the desired behavior:
- >0 = TURN NUMLOCK ON
- 0 = TURN NUMLOCK OFF
- <0 = NO CHANGE (default)
For example: FOCUSNUMLOCKSTATE=0
Please note: The settings can also be used to avoid a reported problem with the WinBook laptop keyboards, where the keypad keys are mapped onto standard keys while NumLock is on.
Should you have any questions or issues please use our Support Request Form.
NOTE: For discontinued products or products no longer in development, contact Sales at 603.880.9118 or via e-mail at: sales@powerlan-usa.com.
|
